A warehouse and line-side kanban system for items you consume regularly; we monitor stock levels and ship automatically.
With annual contract
When a screw runs out on a production line, the whole line stops. In our consignment program, frequently used items are held in cabinets or kanban bins at your plant; consumption is barcode-scanned, and shipment is triggered automatically when stock reaches the minimum.
What the program delivers
- 30-50% reduction in inventory cost
- No risk of line stoppage
- Monthly consumption report and demand forecast
- One invoice for total purchases, fewer suppliers
The program can also be applied to our dealers and distributors; you see stock and consumption status on the portal.
Scope of service
- On-site consignment store / kanban bins
- Barcode consumption tracking
- Automatic shipment trigger
- Monthly consumption report
Consignment Stock and Kanban — get a quote
Fill in the form and we will get back to you as soon as possible.
Frequently asked questions
What is the difference between DIN and ISO standards?
Older German standards such as DIN 933 and DIN 931 have largely been replaced by ISO 4017 and ISO 4014. Most dimensions are the same; for M10 and M12 the wrench size is 17/19 mm in DIN and 16/18 mm in ISO. State the standard clearly when ordering.
What do 8.8 and 10.9 mean?
The first number is tensile strength divided by 100 (8 → 800 MPa), the second the yield/tensile ratio (0.8 → 640 MPa yield). 10.9: 1,000 MPa tensile, 900 MPa yield; 12.9: 1,200 MPa tensile, 1,080 MPa yield.
Which coating should I choose?
For indoor use, electro-galvanizing (5-12 µm); for outdoor and steel construction, hot-dip galvanizing; for high-strength (10.9 / 12.9) and corrosion-resistant applications, Geomet. Electrolytic coating carries a hydrogen embrittlement risk for 10.9 and above.
Is there a minimum order quantity?
Catalog products are sold by carton (usually 100-1,000 pieces). The minimum batch for special manufacturing is 5,000 pieces. Minimum purchase terms for dealers vary by tier.
How do I get certificates?
An EN 10204 3.1 certificate is issued for every lot. Enter the lot number on the product label into the certificate lookup tool on our site to download the PDF report. For 3.2, you must request it with the order.